How to configure a WiFi extender

The CyberShield Hub can be configured as a WiFi extender for your wireless network

  1. Connect to the CyberShield Hub WiFi network or LAN port
  2. Open a web browser and go to http://myhub.local or http://192.168.8.1 
  3. Enter the 'Hub admin' password (this can be found on the password card supplied with your Hub)
  4. Go to the Internet Setting page (click globe icon)

    hub main
  5. Click New Connection
  6. Select the Repeater tab
  7. Select WISP from the Mode drop down menu
    hub wan wisp
  8. Wait a few seconds for the SSID box to list available wireless networks and select the required WiFi network
  9. Enter the password for the WiFi network and click Submit

    The CyberShield Hub now connects to the internet using WiFi instead of a network cable. Which means the Hub can be located at the perimeter of the WiFi network and broadcast the CyberShield WiFi to locations that were previously out of range of WiFi.

wifi extender hub

 

 

 

Richard (Support Guru)

If you have any technical questions about CyberShield please feel free to contact me